inter-tech pipes and fittings
About the Company
Inter-Tech pipes and fittings has been manufacturing and supplying a complete range of 3 layer PPR pipes and fittings in the market since the year 2009 in Nepal. ITPF 3 layer PPR pipes and fittings are made up of food grade raw material imported from abroad and lasts for more than 50 years.
The company has a very robust infrastructure and state of the art technology in place that provides impetus to the quality of products. The technical expertise and in-house research team has enabled the company to come up with a new range of PPR products every year. Inter-tech pipes and fittings is the first company to explore and implement the use of 3 layer PPR pipes in various other areas like submersible pumps, industrial pipe-lines and water supply in hilly areas etc. The company also has an in-house well equipped laboratory and the pipes are stringently inspected to meet the international quality standards before being introduced in the market.
The company has been very eager to expand its product line right since its inception and has started manufacturing NS (Nepal Standard Certified) grade HDPE pipes, Lead Free PVC pipes and fittings, CPVC Pipe and Fittings, Conduct Pipe and ASTM Plumbing pipe.
Today, the company has an entire range of products to serve the sanitary market and purpose of water supply in households and otherwise.
PPR Pipes details:
Why ITPF 3 layer PPR Pipes and Fittings?
- Life over 50 years
- Rust free and 100% leak proof
- Light weight, easy to handle, transport and install
- High impact strength hence it’s not easily breakable
- Use of food grade raw materials and UV (Ultra Violet), Anti microbial, LTHA (Anti Oxidant) helps prevent bacterial formation in the fluid and keeps the physical and chemical properties of pipe intact in all environmental conditions
- Suitable for both hot and cold water pipe line and can be used for high pressure water supply
- No dangerous solvent cement required for joining hence good for health
- No reduction in diameter at welding point
- Suitable for use at temperature ranging from -20 degrees celsius and +110 degree celsius
- Variety ranging from 16mm to 110mm and 4kg/cm2 to 20kg/cm2
Technical specifications:
Utilizing our indigenous Research & Development, expertise, we are offering for the first time in Nepal PPR Pipe in 3 Layer Technologies with following benefits:
Outer Most layer (UV Stabiliser Layer)
It is made from UV stabilizers, anti oxidant (LTHA) and food grade PPR material which protects the pipe from any changed in the environmental conditions (Light and Oxygen degradation, reactants, humidity, temperature, pressure etc.) and also protects it from the harmful ultra violet rays of the sun and keeps the property of pipe (Mechanical & Physical) fluid intact in all conditions thus making the pipe suitable for outside plumbing. The anti oxidant used in the outer layer also prevents weathering of color.
Middle layer (Pure PPR Layer)
This layer is pure PPR and Anti oxidant layer it is made up of food grade material and it further reinforces the strength of the pipe. This layer is thicker then the outer and the inner layer and thus it also prevents the material passing through the pipe from environmental changes. It also helps keeping the physical property of the material passing through the pipe intact.
Inner Most layer (Anti-Microbial Layer)
This layer is made up of anti microbial granules and is highly food grade. It prevents from any bacterial growth, algae formation and development of bad odor. This layer is food grade and covered with outer UV layer and middle layer so the fluid in the pipe remains pure, safe and the temperature also remains consistent.
Applications
- Potable Water Pipe Network for Cold and Hot Water Installation. i.e, Residential Buildings, Hospitals, Hotels, Office, Schools, Colleges, Cinema halls, Airport, Solar Plants etc
- Pipe Networks for Rainwater Utilization systems
- Pipe Networks for Swimming Pool Facilities
- Pipe Network in Agriculture and Horticulture
- Heating system inside building including floor, wall, and radiator heating
- Pipe networks for industry i.e, Transportation of
aggressive Fluids (Acids etc.) - Pipe Network for transportation of hygienic liquid in hilly areas
- Pipe Network for Submersible pump and Compressed Air Plants
Welding Procedure
- Prepare the welding machine by fitting dies of required sizes on the machine, Plug the machine to power supply socket, a red light will blow at top of the machine, set the temperature nob at 2600C. After the machine get heated to the set temperature the green light will start to blow indicating the machine is ready for joining of pipe & fitting.
- Cut the pipe at right angles to the pipe axis using suitable pipe cutter. (Fig. 1)
- Mark the welding depth on the pipe using suitable marker. (Fig. 2)
- Push the end of the pipe and fitting simultaneously without turning into the other side of the heating tool. (Fig. 3)
- Leave the pipe and fitting into the heating tool until the heating time is elapsed.
- At the end of the heating time, remove the pipe and fitting from the heating tool and push those immediately against each other, during this process do not rotate the pipe fitting. (Fig. 4)
- Allow the joint to cool for the required time depending upon the size & pressure of pipe & fitting.
HDPE Pipes details:
ITPF HDPE PIPES are(NS) Nepal standard approved high quality HDPE PIPES. The pipes are made from fully food grade PE100 HDPE (High Density POLYETHYLENE) material and are being used for water supply in hilly as well as low lying areas. The pipes are manufactured as per the standards laid by Nepal Bureau of Standards and Metrology and are stringently inspected in the in-house laboratory designed as per NBSM Standard. The pipes are manufactured in various pressure grades ranging from 2.5kg to 10kg/cm2 and in various sized from 16mm to 110mm. In coming years we will be manufacturing HDPE PIPES till 225mm.
PVC Pipes details:
INTER TECH PIPES AND FITTING also manufactures full ranges of lead free PVC(Poly Vinyl Chloride) pipes and fittings. PVC being a sensitive material has to be handled very carefully. The manufacturing of PVC pipes and fittings requires compounding of various supporting raw-materials along with the PVC resin. The industry makes sure the compound of the material is done with high class raw-materials in the appropriate ratio so as to impart maximum strength and durability to the product. The PVC pipes and fittings are mainly used in sanitation line in households, industries and complexes. ITPF PVC PIPES AND FITTINGS are lead free. The raw material used is imported from Thailand and India.
